The Ideas Genie Community Forum

General Category => Tips on using the forum => Topic started by: TXGulfCoast on March 22, 2010, 10:32:23 PM

Title: Testing HTML Code in Signature and Body
Post by: TXGulfCoast on March 22, 2010, 10:32:23 PM
(http://weathersticker.wunderground.com/weathersticker/big2_both_cond/language/www/US/TX/Lake_Jackson.gif) (http://www.wunderground.com/US/TX/Lake_Jackson.html?bannertypeclick=big2)

This is a test...
Title: Re: Testing HTML Code in Signature and Body
Post by: ideasguy on March 22, 2010, 11:21:34 PM
That test is working perfectly!

Good idea Monica. Currently 20C with you. We managed to get up to 15 last week but the temps have plummeted again.
Now its a challenge for us to post our respective weather status on the forum ;)
Title: Re: Testing HTML Code in Signature and Body
Post by: NightHawk on March 23, 2010, 08:49:23 AM
Just a 'hint' of where we are.  ;)

(http://weathersticker.wunderground.com/weathersticker/big2_both_cond/language/www/global/stations/03263.gif) (http://www.wunderground.com/global/stations/03263.html?bannertypeclick=big2)

Laurie.

P.S.  Not enough characters left in my current signature to add HTML code for 'ribbon' weather image (don't want to change current sig), so just showing the 'Body' code.  :)

This is what it would look like if changed -
(http://weathersticker.wunderground.com/weathersticker/gizmotimetempbig_both/language/www/global/stations/03263.gif) (http://www.wunderground.com/global/stations/03263.html?bannertypeclick=gizmotimetempbig)
Title: Re: Testing HTML Code in Signature and Body
Post by: TXGulfCoast on March 23, 2010, 12:59:05 PM
I had to strip out some of the superfluous code to get the gizmo under the 300 characters.  It's quite tasteful, but doesn't give as much info and, even worse, it doesn't give even a.m./p.m. on time.

I'm going to "stick" with the weather sticker -- there's more info.

From the notes on using the sticker I've discovered that the time showing on the sticker isn't the actual time (dynamic).  It's the "observed" time -- so if the airport station only updates once an hour, the same time will show for a whole hour until the airport updates its station.

Stilll useful though.

Title: Re: Testing HTML Code in Signature and Body
Post by: TXGulfCoast on March 23, 2010, 01:32:30 PM
For Malcolm --

Here's the link to get the source code required for your sticker.  http://www.wunderground.com/geo/BigWeatherStickerPromo2/global/stations/03862.html?MR=1 (http://www.wunderground.com/geo/BigWeatherStickerPromo2/global/stations/03862.html?MR=1).

Oddly, the first two, either English or Metric, show Bournemouth airport.  If you scroll down to English/Metric weather sticker, the third one down, it showed St Leonard's and St Ive's, totally different than when I looked at it an hour ago!  Wow, it just turned back to Bournemouth in the last two minutes!  Anyway, copy the entire HTML source code of whichever one of the three you want to your signature on the profile page (if you always want it to show on a post).  I checked it and it is under the 300 character max allowed, but only by 1 character.

For the weather sticker, one is using raw HTML source code, not just a hyperlink to the site.  If you look at the source code you'll see that there is a "built-in" reference to the URL of the Weather Underground site.

The final product:

<img src="http://weathersticker.wunderground.com/weathersticker/big2_both_cond/language/www/global/stations/03862.gif" border="0" height="60" width="468" /> (http://www.wunderground.com/global/stations/03862.html?bannertypeclick=big2)

Hope this helps - I love to see weather info.

Monica
Title: Re: Testing HTML Code in Signature and Body
Post by: Lyn and Malcolm on March 23, 2010, 02:38:49 PM
Thank you Monica for the info.
I have removed my previous post and as you can see I have used the weather gizmo in my signature.
Bournemouth Airport is only about a mile and a half as the crow flies from here, and has much the same night temperature as us, of course the nearer you go towards Bournemouth and the beach, the higher the temperature will be.
Will probably enter it on our website home page as well.

Malcolm
Title: Re: Testing HTML Code in Signature and Body
Post by: TXGulfCoast on March 23, 2010, 02:54:22 PM
You're very welcome, Malcolm.

Adding it to your home page would be excellent.  Looking forward to seeing it there.

Monica
Title: Re: Testing HTML Code in Signature and Body
Post by: NightHawk on March 23, 2010, 03:38:16 PM
As this weather banner that Monica suggested seems to be becoming popular, I have increased the allowable character length in the Signature section of our members' profiles (from 300 to 460).

This will allow for the weather banners' HTML coding length of approx 296 characters to be included along with the normal signature where used.

Laurie.
Title: Re: Testing HTML Code in Signature and Body
Post by: Lyn and Malcolm on March 23, 2010, 03:55:39 PM

It is now at the bottom of our home page Monica.

20c at Lake Jackson and it's only 10.43am your time . >:(  >:(

Our Bananas would be growing at a good rate given that temperature. For a while yet they are still under protection, and growing very slowly, enough for me to have to cut a little off the tops so they don't push the roof off.  ;D

Malcolm
Title: Re: Testing HTML Code in Signature and Body
Post by: ideasguy on March 23, 2010, 04:02:53 PM
Thanks for adjusting the number of characters, Laurie
I notice you had figured this challenge out already having seen the Teeside weather banner  ;)
Title: Re: Testing HTML Code in Signature and Body
Post by: NightHawk on March 23, 2010, 04:22:10 PM
I think this is a great idea that Monica has introduced.  8)

I know she's very keen to keep an eye on the weather patterns, and having the ability to show our local weather conditions in our signatures means that we can all see at a glance what's happening with our members around the world (providing they're posting on the Forum and they have the banner coding too  :D)

Well done Monica.  ;D

Laurie.

P.S.  What's the weather doing in your area George - nudge, nudge.  Tee-hee.  ;)
Title: Re: Testing HTML Code in Signature and Body
Post by: ideasguy on March 23, 2010, 04:44:13 PM
The weather is dry and perfect for my current job - repotting my japanese maples - so you just have to take my word for it  :D ;) until I get a chance to get a Belfast banner   ;D ;D
Title: Re: Testing HTML Code in Signature and Body
Post by: NightHawk on March 23, 2010, 05:56:38 PM
Nice one George.

Wouldn't like to see you getting left out in the 'cold' (a bit of a weather pun there  ::)   ;))

Good luck with your Japanese Maples.  Any chance of some photos of them when you get a chance?

Laurie.
Title: Re: Testing HTML Code in Signature and Body
Post by: TXGulfCoast on March 23, 2010, 06:35:33 PM
Thanks all,

I guess this is a question for Laurie or George:  Would it make sense for me to do a new topic called "add a weather sticker to your signature"?  It then would specifically refer to a "how to" as I would go through the steps for people who aren't used to doing this procedure?

Malcolm, I was just out cutting down the bananas mushed in our January Big Freeze -- one has put up a new little shoot, but it will take a while to get them back to their original height.  If you can believe it, we're actually experiencing below normal temps for this time of year. :'(

Monica
Title: Re: Testing HTML Code in Signature and Body
Post by: ideasguy on March 23, 2010, 07:21:01 PM
Yes, go ahead Monica.

I'll proof read it for you ;)
Title: Re: Testing HTML Code in Signature and Body
Post by: roiphil on March 23, 2010, 07:48:12 PM
catching this isn't it (i hope the banners there) other wise i gonna look a right numpty  ;D
Title: Re: Testing HTML Code in Signature and Body
Post by: roiphil on March 23, 2010, 07:49:43 PM
oohh that works did shannon because as the crow flies it the nearer than limerick and newcastle west is not known and my village does not exist  ;D  ::) and the extended forecast is rain  ::)
Title: Re: Testing HTML Code in Signature and Body
Post by: ideasguy on March 23, 2010, 08:10:28 PM
Told you it was cold here :)
Title: Re: Testing HTML Code in Signature and Body
Post by: Palustris on March 23, 2010, 08:46:33 PM
Just remember please that for some of us this slows the site down so badly that it becomes unusable.
Title: Re: Testing HTML Code in Signature and Body
Post by: ideasguy on March 23, 2010, 09:03:29 PM
Now that is a very valid point, Eric, for those (like you) on dial up.

Try this Eric:
Go into your forum profile
Click Look and Layout preferences
Click the checkbox (to set on) Don't show users' signatures

The banners will not be shown as the members are putting them in their signatures
Does that work for you?

Title: Re: Testing HTML Code in Signature and Body
Post by: roiphil on March 24, 2010, 09:54:13 AM
Just remember please that for some of us this slows the site down so badly that it becomes unusable.
yes good point i did not even think of that myself, let us know how you get on with georges suggestion and if that does not work i will gladly remove my one for you,
Title: Re: Testing HTML Code in Signature and Body
Post by: Palustris on March 24, 2010, 09:58:15 AM
That makes life a little quicker. Ta.
Title: Re: Testing HTML Code in Signature and Body
Post by: ideasguy on March 24, 2010, 10:15:21 AM
Thats great Eric. With your connection , we all know its difficult enough for you at present without added "weight"
Title: Re: Testing HTML Code in Signature and Body
Post by: Lyn and Malcolm on March 24, 2010, 11:02:12 PM
Monica wrote

"Malcolm, I was just out cutting down the bananas mushed in our January Big Freeze -- one has put up a new little shoot, but it will take a while to get them back to their original height.  If you can believe it, we're actually experiencing below normal temps for this time of year. "

Sorry to hear about your poorly bananas, I will start another thread. Here http://www.flowergenie.co.uk/ideas/forum/index.php/topic,1380.0.html (http://www.flowergenie.co.uk/ideas/forum/index.php/topic,1380.0.html)

Malcolm